[Shotimes] Re: Front Springs

sho2go srfdude@cox.net
Wed, 2 Jul 2003 17:45:58 -0700


Those are standard SLO springs.
Mike

----- Original Message ----- 
From: <fwhittle@mindspring.com>
To: <shotimes@autox.team.net>
Sent: Wednesday, July 02, 2003 5:58 PM
Subject: [Shotimes] Re: Front Springs


> I'm pretty sure the front springs on my '95 ATX have "SCH" on them.  Does
anyone have the list of spring codes and specs that I saw here a while back?
>
> Frank Whittle
> '95 ATX
>
> From: "Kevin & Cheryl Airth" <clubairth@peoplepc.com>
> To: "sho2go" <srfdude@cox.net>, <shotimes@autox.team.net>
> Date: Wed, 2 Jul 2003 14:01:03 -0500
> Subject: [Shotimes] Front Springs
>
> My 93 ATX came stock with "JIT" front springs. My wife's 93 ATX came with
> "KMO".
>
> Has anybody found "MUZ" load rating = 1054 lb or "SAF" load rating = 1103
> lb? Both are 200lb/inch springs.
> It still is a mystery to me how Ford used springs? They so many but
> nowhere
> can I find why the small differences. If the car was not at correct ride
> height from the factory would they change springs to get it level or
> correct? I have a TSB with 1.5 pages listing at least 50 different spring
> codes for Taurus/SHO/Sable. The cars are all identical with very small
> differences in weight, why so many ? As cheap as Ford was/is they must of
> had a use for all this variation.
> .
> .
>
>
>
> > Actually, when Ford was putting the designed springs in, and not
> whatever
> > was left over, I think they did pay attention to ATX vs MTX.  My MTX and
> > others I've seen had the JIT springs, which while having a 200lb/in
> rate,
> > were load rated at 954 lbs.  Others that had ATXs had KMO front springs,
> > also rated at 200lb/in.  but load rating of 1004 lbs.  These would
> > definitely be taller than the JITs so the added front weight would take
> them
> > down to the same height as the MTX springs.
> > Mike
> >
> >
>
> >
> > > Mike:
> > >  The ATX is slightly heavier but Ford makes no distinction in the
> springs,
> > > just the wagon .VS. sedan. If you can get the spring codes I can
> decode
> > them
> > > for spring rates.
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes