[Shotimes] High pressure line on P/S pump

BtCameron5194527@cs.com BtCameron5194527@cs.com
Thu, 03 Jul 2003 23:25:08 -0400


Well thanks for all of the advice on doing the pump but I started before I could check my mail.  But now I've got another problem.  I could not get the pressure line off of the pump so I cut the hose right after the metal to hose crimp.  There is a long metal tube that goes inside of the hose part and I tried to put a hose clamp on it for a repair.  It didn't work so I started to cut the crimp off with a dremmal but lost daylight and gave up until tommorow.  I'm hopping that I can clamp directly from the hose to the metal tube before the crimp.  If that doesent work I am open to any suggestions.  And by the way I got the pressure line off after the pump was out by locking it in a vice and putting all I had behind a 14" pipe wrench and it still didnt want to give.  Thanks for the help.

Blake
94 White MTX
104K
5 days and counting with the SHO a no go.