[Shotimes] Ride Height

[Ron Porter]

OK, let's get REALLY boring and anal:

1. What size tires do you have, and what is the

	1.1  Advertised diameter?
	1.2  Actual Diameter?

2. What is your tire pressure for the measurement, as well as the tire
measurement at that tire pressure?

3. What strut mounts do you have, and do you run the spacers?

Basically, whatever you told us about your measurements are worthless
without ALL of the information.

This topic is as worthless as asking people what they pay for car insurance
on their SHO.

Ron Porter 

-----Original Message-----
From: van Oss [mailto:vanOss@centurytel.net] 
Sent: Thursday, July 03, 2003 11:54 PM
To: James F. Ryan III; 'Robert Bruce'; 'SHOTIMES'
Cc: ronporter@prodigy.net
Subject: Re: [Shotimes] Ride Height


At the risk of boring Ron, I'll share this FWIW:

--- My 92 wears SHO Shops linears in front, Eibachs in rear.  Front, floor
to fender lip, is 25.5.  Rear, floor to lip, is 26.5.  Most people consider
this a SHO that rides about as low as possible in front, and it is pretty
sharply raked.

--- My 91 wears Eibachs front, Cargo Coils rear.  Front, floor-to-lip is
26.5, rear is 26.

Joseph


----- Original Message -----
Finally got around to measuring mine.  I have SHO Shop linear springs,
Koni's and 225/55-16s.
FRONT:
floor to fender:  26"
EAR:
floor to fender:  24-3/8"
Jim Ryan