[Shotimes] 93 atx Timing belt*** help!!**

[Herman Anker]

I made a mark on the belt to align with the dot for all 3 sprockets. Doesnt matter what dot you are using as long it is present on the sprocket it self. You can make your own dot if you want, as long as you have corresponding labelling on the belt.

Mine looked like cam was way off compared to crank... whats important is not if it seems crooked right now, the important is to be able to verify that it sits in excact same position as before u took it off.

Barry wrote:

> Well, the dreaded CPS went out again and of course half way through the repair
> process we had to order another part leaving the car untouched for a week.
>
> Anyway, on the T-belt cover there are 3 marks 0   then  I    then 0.. I assume
> that the middle I mark is the TDC but I want to be sure before I put it back
> together. Also, we lined up the dots/lines on the cam gears and they haven't
> moved, assuming the crank hasn't made any rotation(it has but I moved it back
> going the opposite direction- it's never made a complete rotation) I should be
> okay, no? anyway, which marks on the timing belt cover do I use?
>
> Thanks in advance, my wife thanks you too... she wants her car back badly.
>
> B-
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes

--
_______________________________________________________________________________

'95 ATX  ~139 000 km
Mods&Service page: http://hanker.tripod.com/sho.htm
Ontario SHO enthusiast club: http://www.shopower.com/
High tech Automotive lighting faq: http://faq.auto.light.tripod.com
_______________________________________________________________________________