[Shotimes] ground
Ron DeReus
dereus@fbx.com
Thu, 10 Jul 2003 23:19:08 -0500
Got it - if only I could think of a symptom my SHO has had that this might
fix; guess I'll find out tomorrow. Has George ever seen blinking lights
with the key out? I think I topped him with my bad PCM ground today!
Thanks, and thanks for the input on my strange no-start problem last night
and today.
Ron D.
The one snake support is a stud and it attaches there.
Ken
-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of Steve Weinrich
Sent: Thursday, July 10, 2003 8:56 PM
To: Shotimes
Subject: Re: [Shotimes] ground
There should be one ground strap running from the rear pass side lower snake
mount (stud) to the firewall.
There should be a different ground wire running from the negative battery
cable to the strut tower. That same strut tower connection should also have
a second ground wire that goes to an inline connector. The other end of the
wire from that connector runs to the PCM and is the PCM ground.
George F can tell you all about what happens when that last connection
fails..
Steve
----- Original Message -----
From: "Ron DeReus" <dereus@fbx.com>
To: "Shotimes" <shotimes@autox.team.net>
Sent: Thursday, July 10, 2003 7:31 PM
Subject: [Shotimes] ground
> I see a ground strap running from the passenger side firewall in the
engine
> compartment, to a bolt on the strut tower securing the engine dampener on
> that side. Is this correct, or should it be firewall to a bolt in the
> snakes or something?
>
> Ron DeReus
> 95MTX
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes