[Shotimes] Link to Sway bar info?

[Steve Weinrich]

The 15/16"  ES bushing is the correct size, but is special order.

The 7/8" ES bushing is a bit small for the 24mm SB, but will work.  The
bushing will just gap open more than you'll like.  OTOH, they are hanging on
the rack at my local AutoZone for around $18 C&C.

If you go the greaseable ES bushing route, pick up a pair of 90 degree
grease zerks so that you can grease them without dropping the rear of the
subframe.

Steve
----- Original Message -----
From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
To: "Ron Porter" <ronporter@prodigy.net>; "'SHOtimes'"
<shotimes@autox.team.net>
Sent: Friday, July 11, 2003 10:18 AM
Subject: Re: [Shotimes] Link to Sway bar info?


> I might not even get the front bar on today. I can't seem to find anyplace
> that has the 24mm sway bushings in stock from ES. I might see if I can
pick
> them up somewhere out towards the convention and just do some work in the
> parking lot. I'm sure others will. I am changing my rear bar to the 26
> today, cause the stock one on there sucks really really bad with my mods.
> Plus I have nice new TPR for the rear.
>
>
> ----- Original Message -----
> From: "Ron Porter" <ronporter@prodigy.net>
> To: "'Bruce Malachuk'" <bmalach1@nycap.rr.com>; "'SHOtimes'"
> <shotimes@autox.team.net>
> Sent: Friday, July 11, 2003 11:01 AM
> Subject: RE: [Shotimes] Link to Sway bar info?
>
>
> > My '94 MTX, as well as others I've talked to, all have the 24/23 (F/R)
> > combo.
> >
> > I am running 24/26 now, it is not "too much". Properly driven it will
work
> > just fine. The greater bar differentials F/R help the car pivot better
at
> > lower speeds, as in autocross.
> >
> > I received a 22mm front bar from Russ McCoy, but I'm not putting it on
for
> > Blackhawk. I'll try it with the 26mm rear bar later on. I'm curious to
see
> > how this '94 does with the 24/26 and the long SFCs. The setup is
basically
> > identical to my former '95, the only difference being the SFCs on this
> car.
> >
> > Note in advance. If you feel that the car is plowing too much at the
> track,
> > chances are you are coming into a curve/turn too hot, and may be on the
> > brakes while you are steering. Come in slow, brake in a straight line,
and
> > power it hard on the way out.
> >
> > Ron Porter
> >
> > -----Original Message-----
> > From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]
> > On Behalf Of Bruce Malachuk
> > Sent: Friday, July 11, 2003 10:43 AM
> > To: SHOtimes
> > Subject: [Shotimes] Link to Sway bar info?
> >
> >
> > Anyone have the link to the page that has a listing of our sway bar
> combos?
> > I'm adding my 24/26 today but was wondering if it might be too much on
my
> > car
> > for use at Blackhawk.
> >
> > I think I have a 19 up front and a 21 in the back on my 94 MTX. Gotta
> break
> > out the digital caliper and make sure.
> >
> > Bruce
> > 94 Opal Frost MTX
> > 93 Black ATX - winter beater then parts car :-)
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes