[Shotimes] Link to Sway bar info?

[Ron Porter]

If your '94 is stock, I'll bet it already has the 24mm front bar. Get under
there and measure that bar to make sure. If need be, NAPA carries the rubber
24mm bushings.

SHO Nut carries the poly front bushings with Josh's grease fitting setup.
You might try & contact him and bring it to the Convention, but I seriously
doubt that you need it, as I believe you already have the 24mm front bar on
the car.

Ron Porter 



-----Original Message-----
From: Bruce Malachuk [mailto:bmalach1@nycap.rr.com] 
Sent: Friday, July 11, 2003 11:19 AM
To: Ron Porter; 'SHOtimes'
Subject: Re: [Shotimes] Link to Sway bar info?


I might not even get the front bar on today. I can't seem to find anyplace
that has the 24mm sway bushings in stock from ES. I might see if I can pick
them up somewhere out towards the convention and just do some work in the
parking lot. I'm sure others will. I am changing my rear bar to the 26
today, cause the stock one on there sucks really really bad with my mods.
Plus I have nice new TPR for the rear.


----- Original Message ----- 
From: "Ron Porter" <ronporter@prodigy.net>
To: "'Bruce Malachuk'" <bmalach1@nycap.rr.com>; "'SHOtimes'"
<shotimes@autox.team.net>
Sent: Friday, July 11, 2003 11:01 AM
Subject: RE: [Shotimes] Link to Sway bar info?


> My '94 MTX, as well as others I've talked to, all have the 24/23 (F/R)
> combo.
>
> I am running 24/26 now, it is not "too much". Properly driven it will work
> just fine. The greater bar differentials F/R help the car pivot better at
> lower speeds, as in autocross.
>
> I received a 22mm front bar from Russ McCoy, but I'm not putting it on for
> Blackhawk. I'll try it with the 26mm rear bar later on. I'm curious to see
> how this '94 does with the 24/26 and the long SFCs. The setup is basically
> identical to my former '95, the only difference being the SFCs on this
car.
>
> Note in advance. If you feel that the car is plowing too much at the
track,
> chances are you are coming into a curve/turn too hot, and may be on the
> brakes while you are steering. Come in slow, brake in a straight line, and
> power it hard on the way out.
>
> Ron Porter
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
> On Behalf Of Bruce Malachuk
> Sent: Friday, July 11, 2003 10:43 AM
> To: SHOtimes
> Subject: [Shotimes] Link to Sway bar info?
>
>
> Anyone have the link to the page that has a listing of our sway bar
combos?
> I'm adding my 24/26 today but was wondering if it might be too much on my
> car
> for use at Blackhawk.
>
> I think I have a 19 up front and a 21 in the back on my 94 MTX. Gotta
break
> out the digital caliper and make sure.
>
> Bruce
> 94 Opal Frost MTX
> 93 Black ATX - winter beater then parts car :-)
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes