[Shotimes] torque specs

[Kurt Metros]

Dave,

Straight from my Ford Service CD:

Rod Bearings:

Install connecting rod cap nuts. Tighten nuts using two step method.
Tighten to 30-35 N-m (22-26 lb-ft), then to 45-50 N-m (33-37 lb-ft).

Main Bearings:

Apply a coat of Engine Assembly Lubricant D9AZ-19579-D (ESR-M99C80-A) or
equivalent to bearing cap bolts and tighten in sequence shown. Use
two-step method. Tighten to 46-69 N-m (34-51 lb-ft), then, tighten to
78-88 N-m (58-65 lb-ft).

Tighening sequence found at:



>-----Original Message-----
>From: shotimes-admin@autox.team.net 
>[mailto:shotimes-admin@autox.team.net] On Behalf Of David Schultz
>Sent: Saturday, July 26, 2003 3:03 PM
>To: shotimes@autox.team.net
>Subject: [Shotimes] torque specs
>
>
>Hi all.
>
>Could someone help me out with some torque specs.  I need 
>specs for the Main 
>bearing caps and rod bearing caps.  This is on a 3.2l.  Also 
>if there is a 
>specific order that is needed would be helpful as well.  Could 
>use the head 
>bolt info as well.
>
>Or point me to a site that might have this info.
>
>Thanks
>
>Dave
>
>_________________________________________________________________
>Help STOP SPAM with the new MSN 8 and get 2 months FREE*  
>http://join.msn.com/?page=features/junkmail
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes