[Shotimes] What is the proper stuff for cleaning a MAF

[Carl Prochilo]

The actual sensor pickup is either one or two metal filaments depending on
your MAF, so I went with Electrical contact cleaner.

I'd be very surprised if this turns out to be your problem.

Cheers,
Carl Prochilo
92 Ultra Red Crimson
----- Original Message ----- 
From: "Paul L Fisher" <sho@paul-fisher.com>
To: "SHOtimes (Team.net)" <shotimes@autox.team.net>
Sent: Tuesday, July 29, 2003 3:53 PM
Subject: [Shotimes] What is the proper stuff for cleaning a MAF


> Carburetor cleaner? Berryman's? Brake cleaner? Contact cleaner? Water?
>
> Also, what is the proper procedure?
>
> Paul L Fisher
> '93 Ford Taurus SHO Crimson Clearcoat ATX 175K Build date 11/18/1992
> - K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back,
Holley
> 190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
> Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs,
Delrin
> sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.
>
> SHO Club member http://www.shoclub.com/
> Check out my web site http://www.paul-fisher.com/
> Amsoil dealer http://www.paul-fisher.com/oil.htm
>
> Get $5 free from PayPal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6
>
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.504 / Virus Database: 302 - Release Date: 7/24/2003
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes