[Shotimes] What is the proper stuff for cleaning a MAF

[Kirk Doucette]

I use Berrymans or Brakeklean for a few years without incident.

Hose it down good, let it dry a bit then install.

Kirk J Doucette
NESHOC President
Stormtrooper-97 White

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]On
Behalf Of Paul L Fisher
Sent: Tuesday, July 29, 2003 3:53 PM
To: SHOtimes (Team.net)
Subject: [Shotimes] What is the proper stuff for cleaning a MAF

Carburetor cleaner? Berryman's? Brake cleaner? Contact cleaner? Water?

Also, what is the proper procedure?

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 175K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs, Delrin
sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from PayPal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.504 / Virus Database: 302 - Release Date: 7/24/2003
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes