[Shotimes] Re: Barometer sensor

[Steve Weinrich]

Yes.  Ford used an off the shelp MAP sensor as a BARO sensor.  When the
sensor is connected via vacuum line to the manifold, it then functions as a
MAP.

Steve
----- Original Message -----
From: "Paul Nimz" <pmnimz@v8sho.com>
To: "`V6 SHOtimes" <SHOtimes@autox.team.net>
Sent: Tuesday, June 10, 2003 11:57 AM
Subject: [Shotimes] Re: Barometer sensor


> And is the MAP the same as the BARO sensor?
>
> Paul Nimz
> '97 TR
> '93 EG mtx
>
>
>
>   ----- Original Message -----
>   From: Paul Nimz
>   To: `V6 SHOtimes
>   Sent: Tuesday, June 10, 2003 11:49 AM
>   Subject: Barometer sensor
>
>
>   While trying to chase down my mysterious 2 digit codes on the '93, I see
a
> reference to the barometer sensor.  Is it the strangely, almost
rectangular
> shaped object in the middle of the firewall which has a 3 pin connector
> attached to it?  Is it suppose to have a vacuum line connected to it?
>
>   Helms says to see if it will hold 18" of vacuum to see if it is ok.
>
>   The part has the number E7EF-12A644-A2A on it.
>
>   Thanks
>
>   Paul Nimz
>   '97 TR
>   '93 EG mtx
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes