[Shotimes] Re: Barometer sensor

[Paul Nimz]

I was wondering as in the PCED manual it refers to it as a MAP/BARO.  I
assume then that the 3.0L has the BARO which does the same function.

Paul Nimz
'97 TR
'93 EG mtx



----- Original Message ----- 
From: "Dave Kegel" <d.kegel@attbi.com>
To: "Paul Nimz" <pmnimz@v8sho.com>; "`V6 SHOtimes" <SHOtimes@autox.team.net>
Sent: Tuesday, June 10, 2003 12:28 PM
Subject: Re: [Shotimes] Re: Barometer sensor


> I don't think so.  The SHO doesn't have a MAP sensor.
>
> Dave
> ----- Original Message -----
> From: "Paul Nimz" <pmnimz@v8sho.com>
> To: "`V6 SHOtimes" <SHOtimes@autox.team.net>
> Sent: June 10, 2003 11:57 AM
> Subject: [Shotimes] Re: Barometer sensor
>
>
> > And is the MAP the same as the BARO sensor?
> >
> > Paul Nimz
> > '97 TR
> > '93 EG mtx
> >
> >
> >
> >   ----- Original Message -----
> >   From: Paul Nimz
> >   To: `V6 SHOtimes
> >   Sent: Tuesday, June 10, 2003 11:49 AM
> >   Subject: Barometer sensor
> >
> >
> >   While trying to chase down my mysterious 2 digit codes on the '93, I
see
> a
> > reference to the barometer sensor.  Is it the strangely, almost
> rectangular
> > shaped object in the middle of the firewall which has a 3 pin connector
> > attached to it?  Is it suppose to have a vacuum line connected to it?
> >
> >   Helms says to see if it will hold 18" of vacuum to see if it is ok.
> >
> >   The part has the number E7EF-12A644-A2A on it.
> >
> >   Thanks
> >
> >   Paul Nimz
> >   '97 TR
> >   '93 EG mtx
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes