[Shotimes] Aftermarket KYB Struts?

[Dave Kegel]

By '95 both ATX and MTX had the weenie suspensions.  It's probably got a 23
or 21mm rear bar.  Front's probably 21-ish.  I think the SHOtimes FAQ lists
the bar combos.

Dave

----- Original Message -----
From: "Carl Prochilo" <gr8sho@prochilo.myserver.org>
To: "Dave Kegel" <d.kegel@attbi.com>; <shotimes@autox.team.net>
Sent: June 11, 2003 3:35 PM
Subject: Re: [Shotimes] Aftermarket KYB Struts?


> Don D. measured the front anti-sway bar on my 92.  It rang up at 24.6mm.
I
> had already upgraded the rear bar on my 92 to a 26mm.
>
> The bar on the 95 looks to be stock.  I'll have to use a C-clamp or some
> other tool to measure it to be sure, but what is the normal size I should
> expect to see on a 95 MTX?  I thought the ATX and MTX were different in
this
> area, the former getting a softer suspension.
>
> Carl
> ----- Original Message -----
> From: "Dave Kegel" <d.kegel@attbi.com>
> To: <shotimes@autox.team.net>
> Sent: Wednesday, June 11, 2003 3:48 PM
> Subject: Re: [Shotimes] Aftermarket KYB Struts?
>
>
> > Since it's a '95 it's most likely got the standard Taurus springs, which
> > will work with about any strut.  KYBs are not a good match to the
earlier
> > heavier rate SHO-specific springs.  You might want to measure the sway
> bars
> > and see if they've been changed.
> >
> > Dave