[Shotimes] Aftermarket KYB Struts?

[Don McKinnon (AST)]

No differences that I've seen.  My old 94 ATX and 95 MTX, along with 2 other
95's (ATX and MTX) I worked on had a 20.6mm front bar with a 21mm rear bar.

Don McKinnon
95 MTX - White/Mocha 92k miles
Stage 1 Power Package with Stage 1cams
Canyon Carver Road/Race Suspension
Quaife & HiRevs Competition Clutch

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of Carl Prochilo
Sent: Wednesday, June 11, 2003 4:36 PM
To: Dave Kegel; shotimes@autox.team.net
Subject: Re: [Shotimes] Aftermarket KYB Struts?


Don D. measured the front anti-sway bar on my 92.  It rang up at 24.6mm.  I
had already upgraded the rear bar on my 92 to a 26mm.

The bar on the 95 looks to be stock.  I'll have to use a C-clamp or some
other tool to measure it to be sure, but what is the normal size I should
expect to see on a 95 MTX?  I thought the ATX and MTX were different in this
area, the former getting a softer suspension.

Carl
----- Original Message -----
From: "Dave Kegel" <d.kegel@attbi.com>
To: <shotimes@autox.team.net>
Sent: Wednesday, June 11, 2003 3:48 PM
Subject: Re: [Shotimes] Aftermarket KYB Struts?


> Since it's a '95 it's most likely got the standard Taurus springs, which
> will work with about any strut.  KYBs are not a good match to the earlier
> heavier rate SHO-specific springs.  You might want to measure the sway
bars
> and see if they've been changed.
>
> Dave
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes