[Shotimes] pulley to battery clearance

[Ron DeReus]

Well, the tension on the belt is adjusted properly, and the tensioner isn't
coming apart, so the PO put on too small a belt?  I guess I could take it
off and go compare it to a new one - what a hassle.

Ron

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of Mark D. Mallory
Sent: Wednesday, June 18, 2003 11:28 PM
To: Ron DeReus; Shotimes
Subject: RE: [Shotimes] pulley to battery clearance


Yes there should be... typically the clearance disappears when the tensioner
pulley is out of adjustment.  ie, the accessory belt is either loose or is
too small.  Check the tension in your A/C belt.  There should be plenty of
room between the pulley and the battery.

Mark Mallory
Toledo, Ohio
'95 SHO MTX

>-----Original Message-----
>From: shotimes-admin@autox.team.net
>[mailto:shotimes-admin@autox.team.net]On Behalf Of Ron DeReus
>Sent: Thursday, June 19, 2003 12:05 AM
>To: Shotimes
>Subject: [Shotimes] pulley to battery clearance
>
>
>Hey, should there be a bit more than a gnat's a-- between the battery and
>the pulley on my MTX?  The battery is secured with the factory 3 way
>bracket, so I'm pretty sure it can't be moved away - so, if the subframe
>moved, could this be, or would the fender where the batter attaches have
>moved with the subframe?
>
>TIA - gotta get ready for Blackhawk Farms - finally decided to go tonight,
>cheese alergy or not - check's in the mail, Don!
>
>Ron DeReus
>95MTX
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net
>http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes