[Shotimes] front hub

Mike.Wojton@us.o-i.com Mike.Wojton@us.o-i.com
Mon, 30 Jun 2003 10:44:33 -0400


Is the front hub on an SHO the same as a regular Taurus?  My issue
is a broken strut pinch bolt.  Was doing the front-end on Car this
weekend.  Ball joints, tie rod ends, and struts.  Driver's side went
ok (as ok goes with front-end work), but the passenger side bolt
head snapped right off.  Tried to drill it out but broke a bit off
inside.  So I took the whole hub/strut assembly off to try to find
a machine shop to drill it out.  Someone here at work suggested a
hub from a salvage yard.  If it comes to that, does it need to be from
an SHO?

TIA


Mike Wojton
Toledo, Ohio

-'95 Green MTX  3/01-1/03
   ShoShop y-pipe

-'95 White MTX
   '96 Brake Upgrade

"Avoid the clap." - Jimmy Dugan