[Shotimes] front hub

[Dave Kegel]

Use a bolt and a nut.

Dave
----- Original Message ----- 
From: <Mike.Wojton@us.o-i.com>
To: <shotimes@autox.team.net>
Sent: June 30, 2003 9:44 AM
Subject: [Shotimes] front hub


> Is the front hub on an SHO the same as a regular Taurus?  My issue
> is a broken strut pinch bolt.  Was doing the front-end on Car this
> weekend.  Ball joints, tie rod ends, and struts.  Driver's side went
> ok (as ok goes with front-end work), but the passenger side bolt
> head snapped right off.  Tried to drill it out but broke a bit off
> inside.  So I took the whole hub/strut assembly off to try to find
> a machine shop to drill it out.  Someone here at work suggested a
> hub from a salvage yard.  If it comes to that, does it need to be from
> an SHO?
> 
> TIA
> 
> 
> Mike Wojton
> Toledo, Ohio
> 
> -'95 Green MTX  3/01-1/03
>    ShoShop y-pipe
> 
> -'95 White MTX
>    '96 Brake Upgrade
> 
> "Avoid the clap." - Jimmy Dugan
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes