[Shotimes] 95 front & rear stock spring part numbers

[Ron Porter]

Can't really go by unloaded height, unless the spring rate is the same.

Ron Porter 

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Mike.Wojton@us.o-i.com
Sent: Monday, June 30, 2003 11:35 AM
To: shotimes@autox.team.net
Subject: Re: [Shotimes] 95 front & rear stock spring part numbers


I have the front springs off of my '95 that I may be wanting to
get rid of.  I'm putting in springs that I got from someone from
a '93.  I want to hang on to the old ones until I get the car back
on the road and make sure there are no problems.  The '93 springs
were a good 1-1/2 to 2" shorter than the '95's.  I hope I don't
end up with a ground scraper.  They are KMO's.  A good deal
stiffer than the TRS's that came on the car though.


Mike Wojton
Toledo, Ohio

-'95 Green MTX  3/01-1/03
   ShoShop y-pipe

-'95 White MTX
   '96 Brake Upgrade

"Avoid the clap." - Jimmy Dugan




shotimes-admin@autox.team.net wrote on 06/29/2003 08:24:11 PM:

> hi,
> would like to reinstall stock springs in the 95 mtx SHO. anyone have the 

> fomoco part numbers? Ford still have them?
> Jeff 
> 95 mtx in VT
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes