[Shotimes] 95 front & rear stock spring part numbers

[Mike.Wojton@us.o-i.com]

Yeah, I know.  It just seems odd that it was so much shorter.
I was going to cut the strut tabs but decided to wait and see
where it ends up.


Mike Wojton
Toledo, Ohio

-'95 Green MTX  3/01-1/03
   ShoShop y-pipe

-'95 White MTX
   '96 Brake Upgrade

"Avoid the clap." - Jimmy Dugan




"Ron Porter" <ronporter@prodigy.net> wrote on 06/30/2003 12:20:03 PM:

> Can't really go by unloaded height, unless the spring rate is the same.
> 
> Ron Porter 
> 
> -----Original Message-----
> From: shotimes-admin@autox.team.net 
[mailto:shotimes-admin@autox.team.net]
> On Behalf Of Mike.Wojton@us.o-i.com
> Sent: Monday, June 30, 2003 11:35 AM
> To: shotimes@autox.team.net
> Subject: Re: [Shotimes] 95 front & rear stock spring part numbers
> 
> 
> I have the front springs off of my '95 that I may be wanting to
> get rid of.  I'm putting in springs that I got from someone from
> a '93.  I want to hang on to the old ones until I get the car back
> on the road and make sure there are no problems.  The '93 springs
> were a good 1-1/2 to 2" shorter than the '95's.  I hope I don't
> end up with a ground scraper.  They are KMO's.  A good deal
> stiffer than the TRS's that came on the car though.
> 
> 
> Mike Wojton
> Toledo, Ohio
> 
> -'95 Green MTX  3/01-1/03
>    ShoShop y-pipe
> 
> -'95 White MTX
>    '96 Brake Upgrade
> 
> "Avoid the clap." - Jimmy Dugan
> 
> 
> 
> 
> shotimes-admin@autox.team.net wrote on 06/29/2003 08:24:11 PM:
> 
> > hi,
> > would like to reinstall stock springs in the 95 mtx SHO. anyone have 
the 
> 
> > fomoco part numbers? Ford still have them?
> > Jeff 
> > 95 mtx in VT
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes