[Shotimes] front hub

[Mike.Wojton@us.o-i.com]

I haven't taken it anywhere yet.  No one's open on Sunday.  I have a
place I'll try after work today.


Mike Wojton
Toledo, Ohio

-'95 Green MTX  3/01-1/03
   ShoShop y-pipe

-'95 White MTX
   '96 Brake Upgrade

"Avoid the clap." - Jimmy Dugan




"Dave Kegel" <d.kegel@comcast.net> wrote on 06/30/2003 12:07:35 PM:

> You mentioned taking the hub to a machine shop and having them drill it 
out.
> Could they not drill it out either?
> 
> Dave
> ----- Original Message -----
> From: <Mike.Wojton@us.o-i.com>
> To: <shotimes@autox.team.net>
> Sent: June 30, 2003 10:26 AM
> Subject: Re: [Shotimes] front hub
> 
> 
> > Couldn't drill the remaining bolt out.  Broke a drill bit off inside.
> >
> >
> > Mike Wojton
> > Toledo, Ohio
> >
> > -'95 Green MTX  3/01-1/03
> >    ShoShop y-pipe
> >
> > -'95 White MTX
> >    '96 Brake Upgrade
> >
> > "Avoid the clap." - Jimmy Dugan
> >
> >
> >
> > shotimes-admin@autox.team.net wrote on 06/30/2003 11:04:52 AM:
> >
> > > Use a bolt and a nut.
> > >
> > > Dave
> > > ----- Original Message -----
> > > From: <Mike.Wojton@us.o-i.com>
> > > To: <shotimes@autox.team.net>
> > > Sent: June 30, 2003 9:44 AM
> > > Subject: [Shotimes] front hub
> > >
> > >
> > > > Is the front hub on an SHO the same as a regular Taurus?  My issue
> > > > is a broken strut pinch bolt.  Was doing the front-end on Car this
> > > > weekend.  Ball joints, tie rod ends, and struts.  Driver's side 
went
> > > > ok (as ok goes with front-end work), but the passenger side bolt
> > > > head snapped right off.  Tried to drill it out but broke a bit off
> > > > inside.  So I took the whole hub/strut assembly off to try to find
> > > > a machine shop to drill it out.  Someone here at work suggested a
> > > > hub from a salvage yard.  If it comes to that, does it need to be 
from
> > > > an SHO?
> > > >
> > > > TIA