[Shotimes] front hub

[Dave Kegel]

You mentioned taking the hub to a machine shop and having them drill it out.
Could they not drill it out either?

Dave
----- Original Message -----
From: <Mike.Wojton@us.o-i.com>
To: <shotimes@autox.team.net>
Sent: June 30, 2003 10:26 AM
Subject: Re: [Shotimes] front hub


> Couldn't drill the remaining bolt out.  Broke a drill bit off inside.
>
>
> Mike Wojton
> Toledo, Ohio
>
> -'95 Green MTX  3/01-1/03
>    ShoShop y-pipe
>
> -'95 White MTX
>    '96 Brake Upgrade
>
> "Avoid the clap." - Jimmy Dugan
>
>
>
> shotimes-admin@autox.team.net wrote on 06/30/2003 11:04:52 AM:
>
> > Use a bolt and a nut.
> >
> > Dave
> > ----- Original Message -----
> > From: <Mike.Wojton@us.o-i.com>
> > To: <shotimes@autox.team.net>
> > Sent: June 30, 2003 9:44 AM
> > Subject: [Shotimes] front hub
> >
> >
> > > Is the front hub on an SHO the same as a regular Taurus?  My issue
> > > is a broken strut pinch bolt.  Was doing the front-end on Car this
> > > weekend.  Ball joints, tie rod ends, and struts.  Driver's side went
> > > ok (as ok goes with front-end work), but the passenger side bolt
> > > head snapped right off.  Tried to drill it out but broke a bit off
> > > inside.  So I took the whole hub/strut assembly off to try to find
> > > a machine shop to drill it out.  Someone here at work suggested a
> > > hub from a salvage yard.  If it comes to that, does it need to be from
> > > an SHO?
> > >
> > > TIA