[Shotimes] Location of Leak

[Donelson Don]

If you have a tranny leak in all probability, the leak is coming from one of your half shaft seals. 

These are located were the two half shafts mate into your MTX tranny.

You will see fluid running down from these locations collecting at the bottom of the tranny.

dond

---------- Original Message ----------------------------------
From: "jared gardner" <jmcbgardner@hotmail.com>
Date:  Wed, 05 Mar 2003 06:59:25 -0700

>My '91 has started to leak what I believe to be tranny fluid.  Now I'm not 
>sure if that is what it is.  I have been under the car and wiped it down, 
>but the leak is somewhere on the backside of the engine where I can't see.  
>I thought at first it was an oil leak from one of the oil sensors based on 
>the location of the drips, but I'm sure that they are not the culprits.  Any 
>ideas what may be leaking?  I know that it is difficult to try to diagnose 
>such things without seeing.  Just trying to see if any one has had the same 
>thing.
>
>I have a broken motor mount that is needing to be fixed that I have 
>neglected for a while don't know if that is important to the equation or 
>not.
>
>Thanks for any info.
>
>Jared Gardner
>'91 White/Mocha 95K  "with a small incontinence problem at the moment" (the 
>car that is)
>
>
>
>
>
>_________________________________________________________________
>The new MSN 8: smart spam protection and 2 months FREE*  
>http://join.msn.com/?page=features/junkmail
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net
>http://www.team.net/mailman/listinfo/shotimes
>

--
 
dond
91 Super SHO II
 
All work & assembly done by yours truly  : )
 
-3.2 ATX block
-FPS hi-flow heads w/  over sized valves
-Stage I cams
-SHONUT adjustable timing sprockets
-Ported intake & runners
-Ported and extrude honed exhaust manifolds
-Hi-flow catless Y pipe
-Hi-flow exhaust
-BBB
-SHO SHOP T.B.
-SHONUT phenolic spacers
-Quaife
-CAI
-UDP
****
-Cowl hood
-Momo 17x8 rims
-Police grill
-Custom two tone interior
-Complete sunpro gauges
oil temp / water temp / oil pressure
****
-Tokico shocks/Eibach springs
-Polyurethane at all corners 
-Solid-sub frame bushings
-Frame stiffners
-Adjustable rear control arms
-Battery located in trunk for better weight distrubution
****
-12" rotors at all four corners
-Steel braided lines


--