[Shotimes] Help......A/C...connecters

[Epperly]

Once the A/C system has been run the oil is spread through the whole system.
You need to drain the oil from the old compressor in a measuring cup and
from any other part removed. Put new oil in the comp turn it gently by hand
a few times to move it around and cover all parts. You don't want too much
oil as it will not cool as well, too little and it will eat the compressor.
Error to the high side by a little.
        Ken

> You can get the tools at any parts store.
>
> It will take approx 7 oz of oil.  Ask the parts conter-person for the
exact
> amount.
>
> Steve
>
>
> ----- Original Message -----
> From: <Pacfarm@aol.com>
> To: <shotimes@autox.team.net>
> Sent: Wednesday, March 05, 2003 10:03 AM
> Subject: [Shotimes] Help......A/C...connecters
>
>
> > Hi guys.....does anyone know how to get the connecters apart on the A/C
> > tubes..drier etc I'am installing a new compressor and all that goes with
> > it...my Helms won't be here for aweek...also how much oil does this
take?
> > 94 ATX 3.2..
> >
> >        thanks in advance....Art Campbell
> >
> >        94 ATX 130000 miles
> >        91 MTX 103000 miles
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes