[Shotimes] Brake Bias Plugs

[Midwest SHO Specialists]

Not to oversimplify things Bruce, but you can remove your current valves and
weld shut the hole in the end.  That's it. :>)

Mike Kopstain
Midwest SHO Specialists
827 North Chestnut Avenue
Arlington Heights, IL 60004
www.MidwestSHO.com
Sales@midwestsho.com
----- Original Message -----
From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
To: "SHOtimes" <shotimes@autox.team.net>
Sent: Friday, March 07, 2003 10:15 PM
Subject: [Shotimes] Brake Bias Plugs


> I've read everything on the shoforum about these, and they sound pretty
> simple. Paul Nimz had listed some specs about them " The thread is M16x1.0
and
> you need two Vitron O-rings 3/8" OD x 1/4" ID x 1/16" and I was wondering
if
> anyonecould direct me to finding a local kind of place to get what I need
to
> make my own? I'd buy some from SHOnut or Midwest SHO, but I wanted to see
if I
> could make them myself. I can't imagine that they cost more than a few
bucks
> to make. Like could I go to Home Depot and find something to use, or maybe
a
> plumbing supply place? Kinda want to do this for as little as possible.
Maybe
> I could make plugs outta some JBweld, though that wouldn't be reversible.
>
> Thanks in advance
>
> Bruce
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes