[Shotimes] Brake Bias Plugs

[Bruce Malachuk]

well if I had a welder that that would be easy and I wouldn't have asked.

----- Original Message -----
From: "Midwest SHO Specialists" <SHOtimes@midwestsho.com>
To: "Bruce Malachuk" <bmalach1@nycap.rr.com>; "SHOtimes"
<shotimes@autox.team.net>
Sent: Saturday, March 08, 2003 12:35 AM
Subject: Re: [Shotimes] Brake Bias Plugs


> Not to oversimplify things Bruce, but you can remove your current valves
and
> weld shut the hole in the end.  That's it. :>)
>
> Mike Kopstain
> Midwest SHO Specialists
> 827 North Chestnut Avenue
> Arlington Heights, IL 60004
> www.MidwestSHO.com
> Sales@midwestsho.com
> ----- Original Message -----
> From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
> To: "SHOtimes" <shotimes@autox.team.net>
> Sent: Friday, March 07, 2003 10:15 PM
> Subject: [Shotimes] Brake Bias Plugs
>
>
> > I've read everything on the shoforum about these, and they sound pretty
> > simple. Paul Nimz had listed some specs about them " The thread is
M16x1.0
> and
> > you need two Vitron O-rings 3/8" OD x 1/4" ID x 1/16" and I was
wondering
> if
> > anyonecould direct me to finding a local kind of place to get what I
need
> to
> > make my own? I'd buy some from SHOnut or Midwest SHO, but I wanted to
see
> if I
> > could make them myself. I can't imagine that they cost more than a few
> bucks
> > to make. Like could I go to Home Depot and find something to use, or
maybe
> a
> > plumbing supply place? Kinda want to do this for as little as possible.
> Maybe
> > I could make plugs outta some JBweld, though that wouldn't be
reversible.
> >
> > Thanks in advance
> >
> > Bruce
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes