[Shotimes] Wheel Bearings & Tie Rods

[Paul L Fisher]

Wheel bearings are approximately $33.85 a piece at
www.shonutperformance.com. How did he show you movement? If it rocks up and
down, it is bearings. If it rocks back and forth, it is tie rods.

If you do wheel bearings, you have to pull the knuckles off. Make sure to
replace all the fasteners with new ones, especially the hub nut.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 171K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs, Delrin
sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.
'00 Ford Explorer XLT 5.0L V8 AWD Oxford White Clearcoat 41K Build date
11/19/1999
- Amsoil Series 2000 0W-30 oil, K&N Fuel Injection Performance Kit

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6

----- Original Message -----
From: "Urbain, Michael H." <michael.urbain@baesystems.com>
To: <shotimes@autox.team.net>
Sent: Monday, March 10, 2003 6:47 AM
Subject: [Shotimes] Wheel Bearings & Tie Rods


> Went to get an 4 wheel alignment since I just had the clutch replaced.
The
> guy said I needed to replace the wheel bearings and outer tie rods.  The
> wheel did have a lot of play.  He's quoting me something like $175 for the
> bearing kit and $80 for both tie rods, not to mention labor.  I'm going to
> check SHONUT, etc., but does anybody have any other suggestions?
>
> TIA
>
> Michael Urbain
> '92 Black - 152K and kicking!!
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes