[Shotimes] Front 96+ upgrade

[Kirk Doucette]

I just paint the whole thing, the first 15 mins of breaking is dangerous but
after that its all cooked off and saves a lot of time


Kirk J Doucette
NESHOC President
Stormtrooper-97 White

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]On
Behalf Of Alan Fanning
Sent: Monday, March 10, 2003 3:00 PM
To: SHOtimes
Subject: Re: [Shotimes] Front 96+ upgrade

The best solution here is to pony up for zinc-washed rotors from the get-go.
However, if you want to work with what you have, you can sand blast the
inner areas of the rotors (mask off the braking surface with duct tape) and
then paint them with a high temp paint. This has worked well for me, but it
is very labor intensive and dependent on a proper choice of paint. I used
POR-15 high temp grey.

Most people just don't worry about it.

    Alan

Bruce wrote:

> Just wish I had a way to clean the rust out of the rotors I got. hmm
> anyone have any suggestions on how to take care of the rust inside the
> cooling vanes?
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes