[Shotimes] Flex Pipe

[Erik Balser]

If you're looking for a nice sound definitely add a 2nd resonator.  It
REALLY cleans up the upper rpm rasp that you usually get.  I recently had a
kinda custom exhaust done on mine.  The second resonator has made a world of
difference!  As far as the flex pipe goes, I've heard nothing but good
things about them.  The only thing I'm wondering about is what if you need
your clutch done and you need to take the y-pipe off to replace it... seeing
how the flex pipe is welded on.. what do you do?

'95 MTX
Erik B.
http://webpages.charter.net/masho95
----- Original Message -----
From: "James F. Ryan III" <av8r567@optonline.net>
To: <RPIERCE66@aol.com>; <shotimes@autox.team.net>
Sent: Wednesday, March 12, 2003 9:17 PM
Subject: RE: [Shotimes] Flex Pipe


> Rich,
>
> Yes, that's the whole purpose of the flex pipe.
>
> The SHO Shop cat-back uses Edelbrock Performer RPM mufflers.  The mufflers
> are stainless steel, but the pipes are aluminized steel.  I've had my SHO
> Shop exhaust for over 4 years and I love the sound and I've gotten many
> compliments.
>
>
> Jim Ryan
> Wayne, NJ
> '91 Plus - all white/mocha with fiberglass hood, rod shifter, & rear
spoiler
>
> 255 Lph fuel pump, SHO Shop can & horn, 80mm MAF, S&B cone filter, SHO
Shop
> HiFlow Y-pipe & cat-back exhaust, SHO Shop LPM, SHO Shop underdrive
pulleys,
> SHO Shop HiRevs Jr clutch & steel billet LiteWeight flywheel, reinforced
> engine & trans mounts, SHO Shop TQ limiters, SHO NUT aluminum SFBs, FPS
'96
> SHO front brakes, Carbotech F brake pads, Nook's full-body SFCs, Koni adj
> struts, SHO Shop linear springs, 24mm FSB, 26mm RSB, SHO Shop steel f&r
> STBs, Bridgestone Potenza RE-730 225/55-16, CATZ MSP fog lights, police
> grille
>
>
>
>
>
>
>
> > -----Original Message-----
> > From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]
> > On Behalf Of RPIERCE66@aol.com
> > Sent: Wednesday, March 12, 2003 1:29 AM
> > To: shotimes@autox.team.net
> > Subject: [Shotimes] Flex Pipe
> >
> > One of these days, Spring is gonna arrive and I have a few thing the SHO
> > is
> > begging for
> > My exhaust doughnut regularlly breaks down and causes an exhaust leak.
> > I have a SHo Shop Y pipe (MTX) and SHO SHOP cat back system.
> > WOuld the FLex pipe conversion kit eliminate this?
> > If so
> > what are the drawbacks?
> > also, what mufflers are on the sho shop cat back system? Its a Stainelss
> > Steel system i think?
> >  looking for a different sound , and i will look to add a bigger/second
> > resonator too
> > thanks
> > Rich
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes