[Shotimes] Radiator Hints for Gen 2 ATX

[ATXSHO93@aol.com]

In a message dated 3/20/03 1:43:58 PM Pacific Standard Time, 
PEHaman@directv.com writes:

> I was able to reinstall it this way, and it took 1 minute or less to 
> completely fasten it, where it took about 5 minutes of working the hex nut 
> one face at a time to remove it, while there was tension on the connector.
> 
> 
My hex nuts seized and one of the aluminum lines snapped at the fitting.  I 
had to use brass male barbed fittings and rubber lines from the cooler to the 
transmission.  No big deal if you have already done the trans line cooler mod 
:)

John Gentry
'93 ATX  waiting on all new a/c lines to arrive.