[Shotimes] 91 MTX: Sloppy Shifter.

[John Weidenbenner]

Check out SHONUT. Josh lists a clip that will hold the ball joint together.
The other cable has a hole with rubber bushing that fits over a pin. the
rubber bushing breaks/rots/vanishes. Make a sleeve to take up the slop and
use another clip to hold it together. The cable shifter will feel like new.

John W.

----- Original Message -----
From: "Hans C. Kaspersetz" <hans@cyberxdesigns.com>
To: <shotimes@autox.team.net>
Sent: Sunday, March 30, 2003 7:47 AM
Subject: [Shotimes] 91 MTX: Sloppy Shifter.


> Hello all,
>
> Note:  I may have sent this to the list and just not be seeing it.
> Sorry.  This is my first post and I am trying to get it right.
>
> My '91 MTX is under going a tranny rebuild and other misc. work  I have
> a sloppy shifter right now and I want to fix it.  I took a look at the
> end of the shift cable and it looks like a grommet is missing.
>
> What I mean is the plastic cup at the end of the shifter cable that sits
> over the ball on the tranny  looks like it is missing something.  There
> is a lot of play and the cup is loosely sitting on the ball.  Can I
> replace the end of the cable or what is the solution?
>
> Thanks for your help,
> Hans
> '91 MTX Black
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes