[Shotimes] Wilwood Caliper Brake Pads

[Ian Fisher]

Anyone that is using the standard SHOstopper kit is using either the
older Superlite IIA caliper (that's what I have) or the newer Billet
Styled Superlites (BSL's). I know that Mark has the BSL's as do most
people. Todd also offers a 6 piston setup as well I have an email with
the caliper choices somewhere, but I am going back to bed for an
hour...Bore sizes are either 1.75" or 1.38" for the IIA's. The BSL's
(most of them at least) have differential bore sizes to allow for
better, more even pad wear. Personally, I need to measure my bores so I
can get seals to rebuild them.

I know that Todd is also offering that SHOstopper jr kit that uses
different calipers. The Superlites won't fit on a 94-95 spindle on 11.6"
(96 rotors) due to mounting ear clearance issues. I'd imagine that the
calipers that Todd is using for the jr kit are different for this reason
.

:)

Ian


-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Mark Nunnally
Sent: Wednesday, April 30, 2003 9:40 PM
To: shotimes
Subject: Re: [Shotimes] Wilwood Caliper Brake Pads


> Ok, the next question which should have been the first:   Which
caliper
are
> those of you with Wilwoods of you using?

    Tom and I both have the 4 pot billet units (current TCE SHOstopper
12.2"
kit)

mark
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes