[Shotimes] rod bearings
sho2go
srfdude@cox.net
Sat, 3 May 2003 09:04:41 -0700
Yup, on top is normal wear. But I never heard of a systematic wear pattern
starting from the back; I wonder if some of the cylinders weren't as strong,
either valves, plugs/wires, or even oil in the plug holes.
Mike
----- Original Message -----
From: "Kerry Kinion" <kerry@kinionfurniture.com>
To: "Josh Salaets" <jsalaets@msn.com>; <Shotimes@autox.team.net>
Sent: Saturday, May 03, 2003 2:48 AM
Subject: RE: [Shotimes] rod bearings
>
> After all this (and yes I saved the old bearings), the rear of the
> engine had much more wear than the front. I started at the rear of the
> engine and worked my way forward. Without regard to piston # - if you
> start at 6 (Rear) and work towards (1) front, the bearings were much
> less worn as I worked my way forward. But, noticeably worn on the top
> as I understand is typical.