[Shotimes] Metal gasket?

[Paul L Fisher]

OK. No. I don't have one.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 172K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs, Delrin
sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6

----- Original Message ----- 
From: "Steve Tatro" <stevetatro_shotimes@att.net>
To: "'Paul L Fisher'" <sho@paul-fisher.com>; "'SHOtimes'"
<shotimes@autox.team.net>
Sent: Wednesday, May 07, 2003 8:53 AM
Subject: RE: [Shotimes] Metal gasket?


> If you'd kindly read the first paragraph again, you'll see I clearly
> stated which "rear" I was referring to!
>
> Thanks.
>
> Steve Tatro
> Red/Black '93 with 167k miles
> Cincinnati, Ohio
>
>
>
> -----Original Message-----
> From: Paul L Fisher [mailto:sho@paul-fisher.com]
> Sent: Wednesday, May 07, 2003 9:48 AM
> To: stevetatro@att.net; SHOtimes
> Subject: Re: [Shotimes] Metal gasket?
>
>
> Is this another 'special' part on your car? When you say 'rear', do you
> mean toward the rear of the car or towards the flywheel/flexplate?
>
> Paul L Fisher
> '93 Ford Taurus SHO Crimson Clearcoat ATX 172K Build date 11/18/1992
> - K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back,
> Holley 190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar,
> Performance-Plus Stainless Steel Y-pipe, '96 brake upgrade,
> Proportioning valve plugs, Delrin sub-frame bushings, Amsoil Series 2000
> 0W-30 oil, Amsoil Synthetic ATF.
>
> SHO Club member http://www.shoclub.com/
> Check out my web site http://www.paul-fisher.com/
> Amsoil dealer http://www.paul-fisher.com/oil.htm
>
> Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6
>
> ----- Original Message ----- 
> From: "Steve Tatro" <stevetatro_shotimes@att.net>
> To: "SHOtimes" <shotimes@autox.team.net>
> Sent: Wednesday, May 07, 2003 8:26 AM
> Subject: [Shotimes] Metal gasket?
>
>
> > Hey, stupid question.
> >
> > What's the big metal gasket on the "rear" of the oil pan called?  Not
> > toward the rear of the car, but to the rear of the engine.
> >
> > C'mon, you know what I mean ;^).
> >
> > I have some oil seeping out from around this thing, and figure it may
> > actually have been torqued down too tight at some point.  Make sense
> > to anyone?
> >
> > I'm thinking of replacing it when I do my rod bearing (since the pan
> > will be off anyway).  Suggestions for where to buy a new one?
> >
> > Thanks,
> >
> > Steve Tatro
> > Red/Black '93 with 167k miles
> > Cincinnati, Ohio _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.478 / Virus Database: 275 - Release Date: 5/6/2003
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.478 / Virus Database: 275 - Release Date: 5/6/2003