[Shotimes] Metal gasket?
Mike.Wojton@us.o-i.com
Mike.Wojton@us.o-i.com
Wed, 7 May 2003 13:06:16 -0400
Crank seal carrier gasket?
I cheated. I just bought all that stuff not too long ago.
Mike Wojton
Toledo, Ohio
-'95 Green MTX 3/01-1/03
ShoShop y-pipe
-'95 White MTX
'96 Brake Upgrade
Everybody is somebody else's weirdo.
shotimes-admin@autox.team.net wrote on 05/07/2003 12:18:06 PM:
> > You mean the metal plate between the transmission
> > and the motor?
>
> > I don't know what it's called, but it's not a
> > gasket and wouln't cause leaks.
>
> I'll apologize in advance for my memory being foggy, but there are TWO
plates in there. One is
> the dust shield that has been mentioned. It will come out from the
bottom pretty easily after
> removal of the starter and one or 2 other bolts. There is another plate
in there that relates to
> the rear main seal and the rear oil pan seal. I don't remember the name
of it but you might find
> the name on Josh T's website or on the shotimes website in articles
related to clutch replacement.
>
> The ideal situation is to pull the flywheel AND the oil pan, then you
can replace everything back
> there that you need to replace. Otherwise they are related such that
when you pull the flywheel
> and rear main seal you slightly disturb the rear oil pan seal. However
you can apply a little RTV
> and get it to work acceptably.
>
> The answer to the original question is that the oil is probably coming
from the rear main seal but
> could be coming from the rear pan gasket.
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes