[Shotimes] Trick to removing rear ABS sensor?
Dave Kegel
d.kegel@attbi.com
Sun, 11 May 2003 18:18:08 -0500
Why remove the knuckle at all? Drill out the bolt with a hand drill and
replace with a bolt and nut.
Dave Kegel
-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Ron DeReus
Sent: Saturday, May 10, 2003 11:04 PM
To: Shotimes
Subject: [Shotimes] Trick to removing rear ABS sensor?
I'm trying to get the left rear knuckle off to drill out the strut pinch
bolt in a drill press. What is the trick to getting the ABS sensor out?
My Chilton's just says "remove it." Well, I have the single 10mm bolt
out that appears to have been securing it, but its still very solidly in
the backing plate. TIA.
Ron DeReus
95MTX
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes