[Shotimes] Trick to removing rear ABS sensor?

[Ron Porter]

Absolutely!! And forget those cobalt drills, which I believe are worthless
and a waste of money. Get a carbide drill and drill the SOB out in under 5
minutes, then use a bolt and nut.

Ron Porter 

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Dave Kegel
Sent: Sunday, May 11, 2003 7:18 PM
To: 'Ron DeReus'; 'shotimes'
Subject: RE: [Shotimes] Trick to removing rear ABS sensor?


Why remove the knuckle at all?  Drill out the bolt with a hand drill and
replace with a bolt and nut.

Dave Kegel
-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Ron DeReus
Sent: Saturday, May 10, 2003 11:04 PM
To: Shotimes
Subject: [Shotimes] Trick to removing rear ABS sensor?


I'm trying to get the left rear knuckle off to drill out the strut pinch
bolt in a drill press.  What is the trick to getting the ABS sensor out?
My Chilton's just says "remove it."  Well, I have the single 10mm bolt
out that appears to have been securing it, but its still very solidly in
the backing plate.  TIA.

Ron DeReus
95MTX
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes