[Shotimes] Re-enforced motor mounts

[Midwest SHO Specialists]

Michael,

I have a reinforced mount here that I will snap a pic of and post for you.
Josh at SHO Nut Performance makes the best mount in my opinion, but if you
want to do it yourself, basically, I use a thicker bolt, with a threaded
hexagonal rod around it for more contact area.  It works well.

Mike Kopstain
Midwest SHO Specialists
827 North Chestnut Avenue
Arlington Heights, IL 60004
www.MidwestSHO.com
Sales@midwestsho.com
----- Original Message -----
From: "Michael Shelby" <mshelby@peoplepc.com>
To: <shotimes@autox.team.net>
Sent: Friday, May 09, 2003 8:43 PM
Subject: [Shotimes] Re-enforced motor mounts


> Is there an easy way to re-enforce the front motor mount? I know that
several
> venders sell mounts that have already been re-enforced, but I have a new
mount
> on hand and I need to get the car on the road by this weekend. I remember
> seeing posts about running a bolt through the mount, or welding a plate
onto
> the mount.....Any body know exactly what should be done?
>
> Thanks!
>
> '94 Opal frost.....Klunks on each shift and has a shiny spot on the intake
> 8-(.
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes