[Shotimes] Oil temp gauge

[Paul Nimz]

I will have a LED light when the tranny temp is on.

Paul Nimz
'97 TR SHO
'93 EG mtx SHO


----- Original Message ----- 
From: "Christian Andretta" <passport@optonline.net>
To: <shotimes@autox.team.net>
Sent: Thursday, May 15, 2003 11:02 AM
Subject: RE: [Shotimes] Oil temp gauge


> How would you know which is which?  Are you going to use the idiot gauge
on
> the instrument panel or do you have an autometer type gauge mounted on
your
> dash?
>
> Chris A
> 99 SF
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net]On Behalf Of Paul Nimz
> Sent: Thursday, May 15, 2003 8:39 AM
> To: Bruce Malachuk; shotimes@autox.team.net
> Subject: Re: [Shotimes] Oil temp gauge
>
>
> Yes a switch would be a good idea in addition if you wanted to freeze the
> mode.  The timer is adjustable to 10 minutes max.  I am lazy and don't
want
> to spend all my time messin' with the switch. :)
>
> Paul Nimz
> '97 TR SHO
> '93 EG mtx SHO
>
>
> ----- Original Message -----
> From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
> To: "Paul Nimz" <pmnimz@v8sho.com>; <shotimes@autox.team.net>
> Sent: Thursday, May 15, 2003 2:56 AM
> Subject: Re: [Shotimes] Oil temp gauge
>
>
> > why not just mount a switch there. Up is water temp down is oil temp?
> >
> > That way the gauge wouldn't be fluctuating all the time, and if you
wanted
> > to watch one ore the other depending on the situation you could easily
> flip
> > a switch.
> >
> > Bruce
> >
> > ----- Original Message -----
> > From: "Paul Nimz" <pmnimz@v8sho.com>
> > To: "sho2go" <srfdude@cox.net>; <shotimes@autox.team.net>
> > Sent: Thursday, May 15, 2003 12:58 AM
> > Subject: Re: [Shotimes] Oil temp gauge
> >
> >
> > > I'm getting ready to install a water temp sender in my ATX line just
> > before
> > > the cooler.  With a repeat timer I will connect it to the dash coolant
> > temp
> > > gauge and have it cycle back and forth every 30 seconds between tranny
> and
> > > coolant temps.  This way I can monitor the tranny temp and the coolant
> > temp.
> > > At least that is the plan.....
> > >
> > > Paul Nimz
> > > '97 TR SHO
> > > '93 EG mtx SHO
> > >
> > >
> > > ----- Original Message -----
> > > From: "sho2go" <srfdude@cox.net>
> > > To: <shotimes@autox.team.net>
> > > Sent: Wednesday, May 14, 2003 4:01 PM
> > > Subject: [Shotimes] Oil temp gauge
> > >
> > >
> > > > Has anyone tried putting the temp sensor in the hole in the pan
where
> > the
> > > > level sensor goes?  I think that the temp readings at the pressure
> > switch
> > > area
> > > > would not be as accurate as pan temps.  Anyone?
> > > > Mike
> > > > _______________________________________________
> > > > Shotimes mailing list
> > > > Shotimes@autox.team.net
> > > > http://www.team.net/mailman/listinfo/shotimes
> > > _______________________________________________
> > > Shotimes mailing list
> > > Shotimes@autox.team.net
> > > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes