[Shotimes] Adding my gauges, got a question or 2

[Paul Nimz]

I use the 3/16" tee on my GEN 1-2 VAK set up at the secondary canister
vacuum line feed.

Paul Nimz
'97 TR
'93 EG mtx



----- Original Message ----- 
From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
To: "SHOtimes" <shotimes@autox.team.net>
Sent: Monday, May 19, 2003 7:02 PM
Subject: [Shotimes] Adding my gauges, got a question or 2


> I'm putting my gauges in, wanted to see waht the general consensus of ppl
> that have vac/boost gauges on which vac line to tap into on the intake?
Also
> what size vac "T" is recomended to work good, I'm gonna be hitting up the
> autoparts place in a few min and I don't feel like making multiple trips.
>
> I'm also putting in my mech oil pressure gauge, I picked up a new sender
for
> the stock location, to use as a guide to finding the correct brass T in
the
> plumbing section at the home depot. Anyone know off had what one I should
be
> getting and can save some time? I'm already making sure that I get a 12ft
roll
> os 1/8in copper tubing for the oil pressure sender while I'm out.
>
> Thanks
>
> Bruce
> 94 Opal Frost MTX
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes