[Shotimes] Adding my gauges, got a question or 2

[Bruce Malachuk]

Thanks paul. that will save me a few min tomorrow morning.

Bruce

----- Original Message -----
From: "Paul Nimz" <pmnimz@v8sho.com>
To: "SHOtimes" <shotimes@autox.team.net>
Sent: Tuesday, May 20, 2003 12:48 AM
Subject: Re: [Shotimes] Adding my gauges, got a question or 2


> I use the 3/16" tee on my GEN 1-2 VAK set up at the secondary canister
> vacuum line feed.
>
> Paul Nimz
> '97 TR
> '93 EG mtx
>
>
>
> ----- Original Message -----
> From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
> To: "SHOtimes" <shotimes@autox.team.net>
> Sent: Monday, May 19, 2003 7:02 PM
> Subject: [Shotimes] Adding my gauges, got a question or 2
>
>
> > I'm putting my gauges in, wanted to see waht the general consensus of
ppl
> > that have vac/boost gauges on which vac line to tap into on the intake?
> Also
> > what size vac "T" is recomended to work good, I'm gonna be hitting up
the
> > autoparts place in a few min and I don't feel like making multiple
trips.
> >
> > I'm also putting in my mech oil pressure gauge, I picked up a new sender
> for
> > the stock location, to use as a guide to finding the correct brass T in
> the
> > plumbing section at the home depot. Anyone know off had what one I
should
> be
> > getting and can save some time? I'm already making sure that I get a
12ft
> roll
> > os 1/8in copper tubing for the oil pressure sender while I'm out.
> >
> > Thanks
> >
> > Bruce
> > 94 Opal Frost MTX
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes