[Shotimes] Rear Sway Bar bushing questions
Ron Porter
ronporter@prodigy.net
Wed, 28 May 2003 01:21:57 -0400
If I did it on a regular basis, it would take a fraction of that, even with
only one jack and 4 jackstands for keeping two cars in the air! 9-year-old
bolts/nuts that haven't been touched since they left the factory are
especially fun, also!!
Note to self: Gotta spend the $$$ for a good impact wrench that actually has
some cajones!! $30 for the Campbell-Hausfeld was not money well-spent (in
hindsight!!!......although is was my first when I bought my first
compressor).
Ron Porter
-----Original Message-----
From: Kirk Doucette [mailto:Kirk.doucette@verizon.net]
Sent: Wednesday, May 28, 2003 1:05 AM
To: Ron Porter; 'David Rosicke'; 'SHOtimes'
Subject: RE: [Shotimes] Rear Sway Bar bushing questions
13hrs? Man your getting OLD
Kirk J Doucette
NESHOC President
Stormtrooper-97 White
-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]On
Behalf Of Ron Porter
Sent: Tuesday, May 27, 2003 8:03 PM
To: 'David Rosicke'; 'SHOtimes'
Subject: RE: [Shotimes] Rear Sway Bar bushing questions
??? What do you mean by "center to center"??
I have a link in the garage. It is 11 1/4" overall, and 5 11/16" from the
inner bushing-stop to bushing-stop.
I don't see where a different length link would change the ride height, it
will just change the position of the bar WRT the strut mounting point.
Ron Porter (still in pain after a 13-hour day of changing sway bars,
subframe bushings, and brake proportioning valves between two SHOs!)
-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of David Rosicke
Sent: Tuesday, May 27, 2003 7:37 PM
To: 'SHOtimes'
Subject: [Shotimes] Rear Sway Bar bushing questions
End links:
Is the factory kit 9.5" center to center?
If so, and since the car is sitting lower, I am thinking of using a 9" kit
instead. The company I am ordering from has 9" or 10" kits.
Body bushings:
Moog has the proper 26MM bushing.
TRW is 25MM max.
ES sucks.
Ford no longer lists the factory part for the 26mm bar.
PST lists a poly-graphite.
I just ordered the PST bushings.
Suggestions on the End links?
Thanks!
Dave R.
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes