[Shotimes] Rear Sway Bar bushing questions
Mike.Wojton@us.o-i.com
Mike.Wojton@us.o-i.com
Wed, 28 May 2003 08:32:16 -0400
Get The Thunder Gun! Ingersoll Rand makes it. A buddy of mine got one
from Harbor Freight. It's pricey. Probably in the upper $150's to $200,
but man does it work great.
Mike Wojton
Toledo, Ohio
-'95 Green MTX 3/01-1/03
ShoShop y-pipe
-'95 White MTX
'96 Brake Upgrade
Everybody is somebody else's weirdo.
shotimes-admin@autox.team.net wrote on 05/28/2003 01:21:57 AM:
> If I did it on a regular basis, it would take a fraction of that, even
with
> only one jack and 4 jackstands for keeping two cars in the air!
9-year-old
> bolts/nuts that haven't been touched since they left the factory are
> especially fun, also!!
>
> Note to self: Gotta spend the $$$ for a good impact wrench that actually
has
> some cajones!! $30 for the Campbell-Hausfeld was not money well-spent
(in
> hindsight!!!......although is was my first when I bought my first
> compressor).
>
> Ron Porter
>
> -----Original Message-----
> From: Kirk Doucette [mailto:Kirk.doucette@verizon.net]
> Sent: Wednesday, May 28, 2003 1:05 AM
> To: Ron Porter; 'David Rosicke'; 'SHOtimes'
> Subject: RE: [Shotimes] Rear Sway Bar bushing questions
>
>
> 13hrs? Man your getting OLD
>
> Kirk J Doucette
> NESHOC President
> Stormtrooper-97 White
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On
> Behalf Of Ron Porter
> Sent: Tuesday, May 27, 2003 8:03 PM
> To: 'David Rosicke'; 'SHOtimes'
> Subject: RE: [Shotimes] Rear Sway Bar bushing questions
>
> ??? What do you mean by "center to center"??
>
> I have a link in the garage. It is 11 1/4" overall, and 5 11/16" from
the
> inner bushing-stop to bushing-stop.
>
> I don't see where a different length link would change the ride height,
it
> will just change the position of the bar WRT the strut mounting point.
>
> Ron Porter (still in pain after a 13-hour day of changing sway bars,
> subframe bushings, and brake proportioning valves between two SHOs!)
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]
> On Behalf Of David Rosicke
> Sent: Tuesday, May 27, 2003 7:37 PM
> To: 'SHOtimes'
> Subject: [Shotimes] Rear Sway Bar bushing questions
>
>
> End links:
>
> Is the factory kit 9.5" center to center?
>
> If so, and since the car is sitting lower, I am thinking of using a 9"
kit
> instead. The company I am ordering from has 9" or 10" kits.
>
> Body bushings:
> Moog has the proper 26MM bushing.
> TRW is 25MM max.
> ES sucks.
> Ford no longer lists the factory part for the 26mm bar.
> PST lists a poly-graphite.
>
> I just ordered the PST bushings.
>
> Suggestions on the End links?
>
> Thanks!
>
> Dave R.
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes