[Shotimes] power to JBL

[Tommy]

Hope this link works.
http://www.shoforum.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=20;t=001256

-Tommy
'95 SHO ATX - 64k miles/101k km

----- Original Message ----- 
From: "van Oss" <vanOss@centurytel.net>
To: <shotimes@autox.team.net>
Cc: "Gil Shoemaker" <gshoemaker1@houston.rr.com>; <1stever@attbi.com>
Sent: Thursday, May 29, 2003 11:38 AM
Subject: [Shotimes] power to JBL


> I have a question about power wiring in the JBL amp system.  I am trying
to
> retrofit JBL into a 92 that came with Premium Sound.  It's mostly a
> plug-compatible swap.
>
> Except for the power wiring.  I've got three connectors and I'm confused
> about how they're supposed to tie together.  I am looking at the EVTM.
>
> -- Coming from the car's harness, there is a two-wire connector
(spade-type
> connectors, female).  The wires are yellow and black-with-green-stripe.
>
> -- Coming from thesubwoofer amp, there's a similar connector (spade-type,
> male) with a red and a yellow wire.
>
> -- Coming from the Radio Choke, there are a red and a
> yellow-with-black-stripe wires.  The red wire goes to a connector (two
> spade-type, female).  On the other pin of that connector there is a black
> wire.  It goes over to a second connector (four-pin, only two used, round
> pins, female); the yellow/black wire coming from the Choke plugs into the
> other pin.
>
> One thing that's confusing:  The EVTM shows red wires being grounds, but
the
> car seems to have the more customary black or black/green ground wires.
>
> I'm just baffled.  How is all of this supposed to connect?  Can anyone
help?
>
> Joseph
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes