[Shotimes] Re: Moonroof Info (was: need a diagram from Gen1 EVTM)

[Ian Fisher]

Rod Schmidt set up diagrams for something like this awhile back. I don't
have his email handy or time to look for it. Anyone have it?

Ian

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Chris "Zap"
Sent: Friday, May 30, 2003 5:09 PM
To: shotimes@autox.team.net
Subject: [Shotimes] Re: Moonroof Info (was: need a diagram from Gen1
EVTM)


    Actually, if anyone happens to have any moonroof information and/or
system wiring diagrams from a manual (GenII) it would be greatly
appreciated as well.  Knowing exactly how it works would allow for a
special circuit to be built if the window module can't be adapted.  I
doubt that it would be very difficult or costly!

Thanks,
Chris
----- Original Message ----- 
From: "Chris "Zap"" <zap@columbus.rr.com>
To: <stevetatro@att.net>; <shotimes@autox.team.net>
Sent: Friday, May 30, 2003 4:54 PM
Subject: Re: [Shotimes] need a diagram from Gen1 EVTM


>     Actually I pondered this very question about a week or two ago.  
> What
I
> am interested in knowing is if anyone has more information about how 
> the "black box" window module works.  I figure before I go messing 
> around with the one for the '94's passenger side and blow it up, maybe

> someone else knows how it works.  I can't actually find a datasheet on

> the IC that is inside the one I have here.  It seems like it wouldn't 
> be too hard to implement it onto the moonroof if it works by detecting

> the increase in current draw when the window reaches the bottom and 
> the motor pulls
harder.
> The only difference with the moonroof lies in the fact that there is a
relay
> in line but I'm not sure if the relay stops the motor when opening.. I
guess
> it's time to pull out the multimeter and find out what the heck is 
> going
on!
>
> ~Chris
> ----- Original Message -----
> From: "Steve Tatro" <stevetatro_shotimes@att.net>
> To: "'van Oss'" <vanOss@centurytel.net>; <shotimes@autox.team.net>
> Sent: Friday, May 30, 2003 3:55 PM
> Subject: RE: [Shotimes] need a diagram from Gen1 EVTM
>
>
> > After this project, methinks you need to delve into creating a 
> > one-touch open moonroof!
> >
> > Then, and only then, will you be "da man" ;^)
> >
> > Good luck with the mods!
> >
> > Steve Tatro
> > Red/Black '93 with 167k miles
> > Cincinnati, Ohio
> >
> >
> >
> > -----Original Message-----
> > From: shotimes-admin@autox.team.net 
> > [mailto:shotimes-admin@autox.team.net] On Behalf Of van Oss
> > Sent: Friday, May 30, 2003 3:45 PM
> > To: shotimes@autox.team.net
> > Subject: [Shotimes] need a diagram from Gen1 EVTM
> >
> >
> > I am interested in retrofitting the "one-touch" or "express down" 
> > feature on the front windows of my 1991 SHO.  However, my EVTM is 
> > 1992.
> >
> > Could someone please send me the pin diagram for the window switches

> > on the driver door of a Gen1?  I can accept GIF, TIFF, JPG, BMP, 
> > whatever. Thanks!
> >
> > If I can make this work I will share the procedure.
> >
> > Joseph van Oss _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes