[Shotimes] need a diagram from Gen1 EVTM

[Frank Costa]

i figured as long as you dont play with a stick a dynamite while you are
figuring it out, it wont blow up.

Although i must say, i had a lot of car parts blow up on me randomly, none
seemed very volatile though......hmmm

Frank
----- Original Message -----
From: "Chris "Zap"" <zap@columbus.rr.com>
To: <stevetatro@att.net>; <shotimes@autox.team.net>
Sent: Friday, May 30, 2003 4:54 PM
Subject: Re: [Shotimes] need a diagram from Gen1 EVTM


>     Actually I pondered this very question about a week or two ago.  What
I
> am interested in knowing is if anyone has more information about how the
> "black box" window module works.  I figure before I go messing around with
> the one for the '94's passenger side and blow it up, maybe someone else
> knows how it works.  I can't actually find a datasheet on the IC that is
> inside the one I have here.  It seems like it wouldn't be too hard to
> implement it onto the moonroof if it works by detecting the increase in
> current draw when the window reaches the bottom and the motor pulls
harder.
> The only difference with the moonroof lies in the fact that there is a
relay
> in line but I'm not sure if the relay stops the motor when opening.. I
guess
> it's time to pull out the multimeter and find out what the heck is going
on!
>
> ~Chris
> ----- Original Message -----
> From: "Steve Tatro" <stevetatro_shotimes@att.net>
> To: "'van Oss'" <vanOss@centurytel.net>; <shotimes@autox.team.net>
> Sent: Friday, May 30, 2003 3:55 PM
> Subject: RE: [Shotimes] need a diagram from Gen1 EVTM
>
>
> > After this project, methinks you need to delve into creating a one-touch
> > open moonroof!
> >
> > Then, and only then, will you be "da man" ;^)
> >
> > Good luck with the mods!
> >
> > Steve Tatro
> > Red/Black '93 with 167k miles
> > Cincinnati, Ohio
> >
> >
> >
> > -----Original Message-----
> > From: shotimes-admin@autox.team.net
> > [mailto:shotimes-admin@autox.team.net] On Behalf Of van Oss
> > Sent: Friday, May 30, 2003 3:45 PM
> > To: shotimes@autox.team.net
> > Subject: [Shotimes] need a diagram from Gen1 EVTM
> >
> >
> > I am interested in retrofitting the "one-touch" or "express down"
> > feature on the front windows of my 1991 SHO.  However, my EVTM is 1992.
> >
> > Could someone please send me the pin diagram for the window switches on
> > the driver door of a Gen1?  I can accept GIF, TIFF, JPG, BMP, whatever.
> > Thanks!
> >
> > If I can make this work I will share the procedure.
> >
> > Joseph van Oss
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes