[Shotimes] Valve Adjustment

[Donald Mallinson]

Kirk,

With the limited amount of shims available, you may not be 
able to get that precise.

Theory is that if you tighten the gap, you will get a bit 
more lift and maybe duration, and that could help a tiny 
bit.  Doubtfull that you could measure it.

I would shoot for the middle or low middle and just try to 
get close.

Don Mallinson

Kirk Jorgenson wrote:
> I am preparing to do valve adjustments on a couple of SHO's.
> The question I have should I be trying to get as close to the minimum 
> gap as possible, or should I be aiming for something towards the middle 
> of the spec?
> Is there any advantage to making the exhaust tighter than the intake or 
> vice versus?
> TIA,
> Kirk
> 
> _________________________________________________________________
> Compare high-speed Internet plans, starting at $26.95.  
> https://broadband.msn.com (Prices may vary by service area.)
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> 
> .