[Shotimes] Replaced much of front end... still get **CRUNCH**

[Kirk Doucette]

That's what I would say, I had Nathan Browns car a week ago with a Popping
noise.. I couldn't find It for the life of me. I loosened the Subframe bolts
and re tightened them. Noise is gone, I don't have a clue as to what it was.
It did look like there was a gap in the AL bushing. Maybe they are
stretching?  I didn't dig any deeper into it.

Kirk J Doucette
NESHOC President
Stormtrooper-97 White

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]On
Behalf Of Christian Andretta
Sent: Monday, November 17, 2003 2:06 PM
To: sho @ crued.net; Ron Childs; shotimes@autox.team.net
Subject: RE: [Shotimes] Replaced much of front end... still get **CRUNCH**

Subframe bushings. It could also be the sway bar.   Did you change the bar
bushings?

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of sho @ crued.net
Sent: Monday, November 17, 2003 12:15 PM
To: Ron Childs; shotimes@autox.team.net
Subject: RE: [Shotimes] Replaced much of front end... still get
**CRUNCH**


It's much to noisy to be the tierods.  Also, you can almost feel the *pop*
through the floorboard.



> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net]On Behalf Of Ron Childs
> Sent: Monday, November 17, 2003 11:03 AM
> To: shotimes@autox.team.net
> Subject: Re: [Shotimes] Replaced much of front end... still get
> **CRUNCH**
>
>
> Does "both tierod ends" mean all four tierod ends? It could be
> the inners if only the outers were done.
>
> -Ron  '91
>
>
> > ----- Original Message -----
> > From: "sho @ crued.net"
> > To:
> > Sent: Monday, November 17, 2003 8:17 AM
> > Subject: [Shotimes] Replaced much of front end... still get **CRUNCH**
> >
> >
> > > I've replaced just about every suspension component there is
> and when I
> > take
> > > hard turns (made worse over bumps), I still get this loud
> *CRUNCH* noise.
> > > Here's what I have replaced
> > >
> > > Front Struts and Strut bearings
> > > Lower control arms (with ball joints)
> > > Both halfshafts
> > > both tierod ends
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes