[Shotimes] Replaced much of front end... still get **CRUNCH**

Paul L Fisher sho@paul-fisher.com
Sat, 22 Nov 2003 14:21:23 -0600


Actually, the inners are just 'tie rods'. The outers are 'tie rod ends' so
each car has two of each.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 180K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs, Delrin
sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

----- Original Message -----
From: "Ron Childs" <rbchilds@pacbell.net>
To: <shotimes@autox.team.net>
Sent: Monday, November 17, 2003 11:03 AM
Subject: Re: [Shotimes] Replaced much of front end... still get **CRUNCH**


> Does "both tierod ends" mean all four tierod ends? It could be the inners
if only the outers were done.
>
> -Ron  '91
>
>
> > ----- Original Message -----
> > From: "sho @ crued.net"
> > To:
> > Sent: Monday, November 17, 2003 8:17 AM
> > Subject: [Shotimes] Replaced much of front end... still get **CRUNCH**
> >
> >
> > > I've replaced just about every suspension component there is and when
I
> > take
> > > hard turns (made worse over bumps), I still get this loud *CRUNCH*
noise.
> > > Here's what I have replaced
> > >
> > > Front Struts and Strut bearings
> > > Lower control arms (with ball joints)
> > > Both halfshafts
> > > both tierod ends
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.541 / Virus Database: 335 - Release Date: 11/14/2003