[Shotimes] Replaced much of front end... still get **CRUNCH**

[van Oss]

Tauri have a two-piece system as Paul describes:  Tie rod mounts on the
rack, tie rod end mounts on the knuckle.  Isn't that pretty much the norm
with rack-and-pinion systems?

The three-piece system Ron mentions is associated with older,
recirculating-ball steering systems like on our 94 Crown Vicky.

Joseph van Oss


----- Original Message -----
Actually, the inners are just 'tie rods'. The outers are 'tie rod ends' so
each car has two of each.
Paul L Fisher

----- Original Message -----
Does "both tierod ends" mean all four tierod ends? It could be the inners if
only the outers were done.
-Ron  '91