[Shotimes] It's about time, eh? (clutch)

[Mike Kopstain]

Because FWIW, there are alot better options for a lot less money.  I'd much
rather have the Fibertuff (Josh's) with a real reinforced preasure plate
than the Centerforce with an iffy disc and a painted stock pressure plate.

~ Mike

Midwest SHO
www.midwestsho.com
Sales@Midwestsho.com
----- Original Message -----
From: "James F. Ryan III" <av8r567@optonline.net>
To: "'SHOtimes'" <shotimes@autox.team.net>
Sent: Monday, November 24, 2003 6:36 PM
Subject: Re: [Shotimes] It's about time, eh? (clutch)


> How come no one mentions the Centerforce clutch kit.  Summit seels the
Dual
> Friction DF346345 pressure plate and clutch disk set for $431.  That only
a
> few dollars more than Josh's $375 set.  I'm too lazy to check, what's the
> South Bend pricing?
>
>
> Jim Ryan - Wayne, NJ
> 91 Plus - all white/mocha
> FPS 96 brakes, Carbotech pads, 55mm MAF w/ K&N, SHO Shop horn, SHO Shop
> Y-pipe and cat-back w/ Edelbrock mufflers, KONIs with SHO Shop linear
> springs, f&r strut tower braces, HiRevs Jr clutch and lightweight
flywheel,
> underdrive pulleys, torque limiters, reinforced engine mounts, 225/55
> Bridgestone Potenza RE730 tires, and police grille.
>
>
> ----- Original Message -----
> From: "Ron Porter" <ronporter@prodigy.net>
> To: "'Alan Fanning'" <Awfanning@earthlink.net>; "'SHOtimes'"
> <shotimes@autox.team.net>
> Sent: Monday, November 24, 2003 12:19 PM
> Subject: RE: [Shotimes] It's about time, eh? (clutch)
>
>
> > ???
> >
> > Josh has the new PP and disk that he brought to the Convention on his
> site.
> > They are the first two items on the Clutch page (looks to be
out-of-stock
> at
> > the moment).
> >
> > As I understand, Josh can get the Ford stuff, but doesn't as his cost
for
> > them has doubled or tripled, and they are no longer a deal through Josh.
> >
> > You can also go to South Bend Clutch ,as a few folks have had good luck
> with
> > them (and I will most likely get my new clutch and possible AL flywheel
> > through them). Here is their main site and their DXD High Performance
> Clutch
> > site:
> >
> > http://www.southbendclutch.com/
> >
> > http://www.dxdracingclutches.com/home.html
> >
> > Ron Porter
> >
> > -----Original Message-----
> > From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]
> > On Behalf Of Alan Fanning
> > Sent: Sunday, November 23, 2003 8:44 PM
> > To: SHOtimes
> > Subject: Re: [Shotimes] It's about time, eh? (clutch)
> >
> >
> > The problem, though, is that Josh doesn't seem to be able to get the
> > Motorcraft clutch set at present - or any other clutch set based on my
> > perusal of his web site.  Anybody heard what his plans are for offering
> > clutch sets in the future?
> >
> >     Alan
> >
> >
> > > I highly recommend Josh @ SHONut's clutch set. It's an excellent
> > > performer, and I'm about to install my second one (first one went into
> my
> > > gf's SHO).
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes